Roof Tile Roll Forming Machine
The roll forming machine consists of manual uncoiler, infeed guide, fixed position driven forming stations, step pressing die, cutting equipment, hydraulic station, control console, and manual unload product run out table. 

Type：roll forming machine
Standard：CE
Size：18m*1.5m*1.4m(depend on final design)
Usage：produce roof tile

 FINISHED PRODUCTS

-EQUIPMENT OF MACHINE
 
1. Machine’s Components
1    5 tons manual uncoiler with new brake design    1set
2    Coil sheet guiding and adjust department    1set
3    Main roll forming system    1set
4    Hydraulic cutting department    1set
5    Hydraulic station    1set
6    PLC control table    1set
7    Final product runout table    1set
 
2. Technician parameter
No.          item    Parameter(all is subject to our final design)
1
     Suitable raw material    Type    Common galvanized steel strip
        Yield strength    235MPa~345Mpa
        Thickness(mm)    0.5mm~0.6mm
        width(mm)    According to final design
2    Manual uncoiler’s capacity    Max.3tons
3    Forming speed(m/min)    About 15~20m/min
4    Main motor power(KW)    5.5kw
5    Hydraulic power(KW)    5.5kw
6    Forming roller groups     Around 18-19 groups(according to final design)
7    Raw material of forming roller    High quality No.45 steel
8    Raw material of cutting blade    Cr12mould steel with quenched treatment
9    controlling system    Mitsubishi PLC& converter
10    Suitable industrial voltage     According to your special requirement
11    Machine weight    About 9 tons(according to final design)

- MACHINE WORKING FLOW

- VIEW OF WORKSHOP

--- QUALITY GUARANTEE
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free.

--- AFTER SERVICE
We offer sale after service for life. If the buyer needs extra installation, training service, the seller should arrange offer technical back-up and assign a technician people to the buyer’s part.